3Dconnexion Login
Reset password.

3DConnnexion

3Dconnexion device pairing with a Universal Receiver

The 3Dconnexion Universal Receiver allows the pairing of up to five wireless 3Dconnexion devices. Once the device and receiver are paired, the devices are uniquely bonded and data can be transmitted to the computer. The pairing tool is installed with 3Dconnexion driver 10.5.2 or later.

 

Download the latest driver

The latest driver can be downloaded from www.3Dconnexion.com/drivers

 

Pairing

  • Make sure the latest driver is installed.
  • Connect the Universal Receiver to your computer.
  • Select the Universal Receiver from the properties panel, click on "Add Device" and follow the instructions.

Note: You may also launch the pairing tool directly by clicking Start -> Programs -> 3Dconnexion -> 3Dconnexion Pairing

 

In case you are using a SpaceMouse Pro Wireless receiver or SpaceMouse Wireless receiver please follow the steps described in our FAQ

Mac OS users
 please download the pairing tool here.

Troubleshooting

If the pairing process fails, please follow these instructions: 

  • Verify the battery of your 3Dconnexion wireless device is charged. The LED should be green after switching the device ON.
  • Confirm that the new USB receiver is correctly plugged in or try connecting it to a different USB port.

If the pairing process continues to fail, please contact 3Dconnexion's Technical Support service.