3DConnexion Space Navigator in RDSH/Terminal Servers
Moderator: Moderators
-
- Posts: 2
- Joined: Wed Jun 18, 2014 5:03 am
3DConnexion Space Navigator in RDSH/Terminal Servers
Does 3DConnexion Space Navigator supported in RDSH/Terminal Server Environment. (2008 R2, 2012, 2012 R2)
Re: 3DConnexion Space Navigator in RDSH/Terminal Servers
Sorry I do not have any info regarding using a RDSH/Terminal server.
In order to use the 3Dconnexion devices remotely, the software forwarding the USB output needs to be able to recognize and forward the output from a 3d device.
Currently there is only one remote application certified for 3Dconnexion devices - Hewlett Packard's Remote Graphics Software. It is listed on our Supported Applications page as 'RGS Workstation Edition'.
HP has a new link for it here:
http://www8.hp.com/us/en/campaigns/work ... itle_r0001
In order to use the 3Dconnexion devices remotely, the software forwarding the USB output needs to be able to recognize and forward the output from a 3d device.
Currently there is only one remote application certified for 3Dconnexion devices - Hewlett Packard's Remote Graphics Software. It is listed on our Supported Applications page as 'RGS Workstation Edition'.
HP has a new link for it here:
http://www8.hp.com/us/en/campaigns/work ... itle_r0001
-
- Posts: 3
- Joined: Thu Nov 03, 2016 3:03 am
Re: 3DConnexion Space Navigator in RDSH/Terminal Servers
Dear Sir
I have problem
My HPz820 workstation instaled Windows Server 2012 r2
+ Space pilot Pro (Last driver from 3dconnexion) used for Solidworks 2015sp5
we have problem: Space pilot not corect work. LCD display nonstop chenge pictogram.
trainer - all ok. Solidworks - pilot not works !!
I make many experements:
1. Chenge USB port 2.0 to 3.0
2. chenge many driver version old, last..
3. down all think client (to my HPz820 conectet 2 think client and use Solidworks)
All combination do not help!
I loking error 1618 instaltion process
I have problem
My HPz820 workstation instaled Windows Server 2012 r2
+ Space pilot Pro (Last driver from 3dconnexion) used for Solidworks 2015sp5
we have problem: Space pilot not corect work. LCD display nonstop chenge pictogram.
trainer - all ok. Solidworks - pilot not works !!
I make many experements:
1. Chenge USB port 2.0 to 3.0
2. chenge many driver version old, last..
3. down all think client (to my HPz820 conectet 2 think client and use Solidworks)
All combination do not help!
I loking error 1618 instaltion process