Mojave support?

Questions and answers about 3Dconnexion devices on macOS.

Moderator: Moderators

Post Reply
eds
Posts: 1
Joined: Fri Sep 28, 2018 6:06 am

Mojave support?

Post by eds »

I have a pretty old 3Dconnexion SpaceNavigator that was working beautifully in High Sierra, but since upgrading to mojave 10.14, the 3DxWare 10.5.3 driver no longer sees the device "No Device Found".

Is Mojave support coming soon?

Thanks!
UtaSH
Moderator
Moderator
Posts: 3754
Joined: Mon Nov 27, 2006 10:34 am
Location: Munich, Germany
Contact:

Re: Mojave support?

Post by UtaSH »

Hi eds,

3Dconnexion is working to add support for macOS 10.14 (Mojave) into the 3DxWare 10 driver. The loading of kernel extensions was modified in the latest version of Apple’s operating system. Due to this fact 3Dconnexion has to make significant changes to the 3DxWare driver. Once the new driver is ready you can find it on our driver download site . We are sorry for any inconvenience this delay may be causing to you.
UtaSH
Moderator
Moderator
Posts: 3754
Joined: Mon Nov 27, 2006 10:34 am
Location: Munich, Germany
Contact:

Re: Mojave support?

Post by UtaSH »

Hi eds,

I apologize for not posting earlier here. As you already might have noticed we have released the new driver for macOS which is ready for macOS 10.14 (Mojave). This is 3DxWareMac 10.6.0 and can be downloaded here.

Important: Please review as well our FAQ #1141. You will find important installation notes there. In case you still have problems after following the steps from FAQ #1141 please contact our Technical Support Team for further troubleshooting.
Post Reply