Hi Hi everybody, Im new in this forum, and first of all please forgive my English!
I have some problem when in the sketcher workbench, wherever I use it, my Space Navigator doesnt allow me to spin roll or tilt. Ive phone to the customer care service but still now, Ive not receive any answer about it.
I want to highlight that when Im in it, the control panel show all the options (about the spin roll tilt function) checked.
Could u help me guys?
Space Navigator and Catia v5r16 sketcher workbench
Moderator: Moderators
-
- Posts: 52
- Joined: Tue Jun 12, 2007 4:44 am
- Location: Italy, Rome
-
- Posts: 2
- Joined: Thu Dec 07, 2006 8:52 pm
Space Navigator and Catia v5r16 sketcher workbench
Hi torniaccio
I couldn't reproduce exactly your issue, because I haven't V5R16. Normally you can open the driver GUI and set-up your preferences while Catia runs. If you will open the plug-in, the same preferences will be set up, because they are (I mean the settings) synchronized.
Did you done an upgrade of 3DxSoftware in the last time? In that case it could be that the settings of an older installation affect your current settings. It would be adviseable in such cases to remove completely the 3DxSoftware as described in this post. Finally install 3DxSoftware again. Please post your findings in order to share your experience.
If you still have problems post again: I will help you.
I couldn't reproduce exactly your issue, because I haven't V5R16. Normally you can open the driver GUI and set-up your preferences while Catia runs. If you will open the plug-in, the same preferences will be set up, because they are (I mean the settings) synchronized.
Did you done an upgrade of 3DxSoftware in the last time? In that case it could be that the settings of an older installation affect your current settings. It would be adviseable in such cases to remove completely the 3DxSoftware as described in this post. Finally install 3DxSoftware again. Please post your findings in order to share your experience.
If you still have problems post again: I will help you.
agoenczi
SpaceNavigator with CATIA V5 R17
Hi James Meyette
Did you install Catia and afterwards 3DxSoftware? 3DxSoftware has to detect the application (-s) already installed.
Did you install 3DxSoftware as an administrator?
Did you install Catia and afterwards 3DxSoftware? 3DxSoftware has to detect the application (-s) already installed.
Did you install 3DxSoftware as an administrator?
agoenczi
Re: Space Navigator and Catia v5r16 sketcher workbench
Hi torniaccio,[quote]I have some problem when in the sketcher workbench, wherever I use it, my Space Navigator doesn
Nuno Gomes
-
- Posts: 52
- Joined: Tue Jun 12, 2007 4:44 am
- Location: Italy, Rome