Fusion 360 "Constrained Orbit" / "Lock Horizon"

If you have questions or comments concerning any non-support related 3Dconnexion topic, please use this forum.

Moderator: Moderators

Post Reply
StephenM
Posts: 7
Joined: Wed Nov 20, 2013 10:52 pm

Fusion 360 "Constrained Orbit" / "Lock Horizon"

Post by StephenM »

Constrained orbit is the default setting in Fusion 360 when using the standard mouse, keeping up facing up, and the horizontal horizontal. This is the preferred way to navigate, with 5 degrees of freedom.

However, it doesn't work with the Spacemouse.

Turning off one or two of the rotational axes in 3DConnexion Properties does not achieve this.

Please help.

In Solidworks, this was possible using "Rotate about Scene Floor".

Please implement this important fix for Fusion 360.
UtaSH
Moderator
Moderator
Posts: 3754
Joined: Mon Nov 27, 2006 10:34 am
Location: Munich, Germany
Contact:

Re: Fusion 360 "Constrained Orbit" / "Lock Horizon"

Post by UtaSH »

Hi StephenM,

the support for the SpaceMouse in Fusion360 was integrated by Autodesk. Please contact their Support Team to let them know that the "Lock Horizon" would be an imported feature to add.
Post Reply