Suggestion to improve Autocad interface

If you have questions or comments concerning any non-support related 3Dconnexion topic, please use this forum.

Moderator: Moderators

Post Reply
jwelin
Posts: 9
Joined: Mon Jan 29, 2007 10:37 am

Suggestion to improve Autocad interface

Post by jwelin »

Autocad's "repeat last command" does not ignore the '3DX_MOTION command issued whenever the Spacemouse is used, making it difficult to repeat the last used drawing or editing command. Autocad's native 3rd button pan and zoom are ignored.
John Welin
Columbian Model and Exhibit
znissan
User
User
Posts: 191
Joined: Tue Nov 28, 2006 12:32 pm
Location: San Jose, CA
Contact:

Post by znissan »

Hello jwelin:

Which version of AutoCAD are you using?

Ziva Nissan
3Dconnexion, Inc.
jwelin
Posts: 9
Joined: Mon Jan 29, 2007 10:37 am

Post by jwelin »

Autocad 2006 version Z.54.10 no service packs applied.
John Welin
Columbian Model and Exhibit
znissan
User
User
Posts: 191
Joined: Tue Nov 28, 2006 12:32 pm
Location: San Jose, CA
Contact:

Post by znissan »

Please make sure you are running the plug-in from the "Archive" section of our website download. Go the Support/Download driver section, choose your product, Archives, and select the plug-in for 2006 or below.

Ziva Nissan
3Dconnexion, Inc.
jwelin
Posts: 9
Joined: Mon Jan 29, 2007 10:37 am

Post by jwelin »

I am using 3dConnexion plugin for Autocad V2.8.2 with 3DxSoftware64 V2.8.2. The behavior in Autocad is as I described before.
John Welin
Columbian Model and Exhibit
Post Reply