Is there a way to rotate and place components in an assembly with a Space Pilot? While it's handy to be able to move an entire assembly, it's a little frustrating not being able to pre position un mated components when setting up an assembly.
Am I missing something?
Placing components in Solidworks assembly mode
Moderator: Moderators
-
- Posts: 8
- Joined: Mon Sep 10, 2007 9:58 pm
Re: Placing components in Solidworks assembly mode
Hi Carltonium,
try button #3 if you have the default mapping on your buttons. If not open the Button Mapping Editor and then open the category "Assembly". You should there find an entry "Move Component" (and "Rotate Component"). Please let me know if this solves your problem.
try button #3 if you have the default mapping on your buttons. If not open the Button Mapping Editor and then open the category "Assembly". You should there find an entry "Move Component" (and "Rotate Component"). Please let me know if this solves your problem.
Uta
3Dconnexion
3Dconnexion
-
- Posts: 45
- Joined: Mon Apr 23, 2007 11:34 am
Actually, it sounds more like he's looking for the option "Moved Selected Objects"
In your 3Dcontrol Properties box, put a check next to "Move Selected Objects" on the Options tab.
That will let you move a part around in an assembly while it is selected. When no parts are selected, you will control the assembly view.
In your 3Dcontrol Properties box, put a check next to "Move Selected Objects" on the Options tab.
That will let you move a part around in an assembly while it is selected. When no parts are selected, you will control the assembly view.