Function Keys Applet and changing config

Questions and answers about 3Dconnexion devices on Windows.

Moderator: Moderators

Post Reply
Wobblysquee
Posts: 6
Joined: Wed Jun 17, 2009 3:01 am
Location: New England

Function Keys Applet and changing config

Post by Wobblysquee »

It would be sweet if the applet would change the button configuration when you pressed the up and down on the pad next to the LCD. Kind of like pressing the config button on the original space pilot. Just my 2 cents
Thanks,

Justin
Wobblysquee
Posts: 6
Joined: Wed Jun 17, 2009 3:01 am
Location: New England

Re: Function Keys Applet and changing config

Post by Wobblysquee »

Wobblysquee wrote:It would be sweet if the applet would change the button configuration when you pressed the up and down on the pad next to the LCD. Kind of like pressing the config button on the original space pilot. Just my 2 cents
Or even better if you could assign multiple sets of functions for a single program and be able to cycle through them with the LCD buttons. So if Im using sketcher I can pull up quickly all of the sketcher tools or if Im extracting electrodes it would be quick to pull those tools up. I know you can do this through the 3dx menu but it is a little combersome.
Thanks,

Justin
UtaSH
Moderator
Moderator
Posts: 3754
Joined: Mon Nov 27, 2006 10:34 am
Location: Munich, Germany
Contact:

Re: Function Keys Applet and changing config

Post by UtaSH »

Hi Justin,

nice idea! Thanks a lot for your input. We will discuss if we can pick this up for a future release.

Uta Ludwig
3Dconnexion
Phil999
Posts: 425
Joined: Tue Jun 30, 2009 5:20 am

Post by Phil999 »

yes, this is a good idea.
Post Reply