Use 3DConnexion over Remote Desktop

Questions and answers about 3Dconnexion devices on Windows.

Moderator: Moderators

Post Reply
rinaldialberto
Posts: 1
Joined: Wed Mar 04, 2020 9:46 am

Use 3DConnexion over Remote Desktop

Post by rinaldialberto » Wed Mar 04, 2020 9:57 am

Hi there,

I just bought a new 3D connexion wireless mouse. I use it to work in Solidworks 2020.

If I use the 3Dmouse connected to my workstation in my office everything works (solidworks).
If I use the 3Dmouse connected to my windows laptop everything works (tutorial is smooth).

I would like to use the 3Dmouse connected to my windows laptop. On my laptop I run Remote Desktop to the workstation in my office where I run Solidworks.
The 3Dmouse is only zooming the solidworks part up in and out. Is there any way to make it work properly?

Waiting for your reply I thank you in advance,
Best Regards
Alberto Rinaldi
Attachments
im.jpg
setup
im.jpg (31.64 KiB) Viewed 4476 times

ETipler
Posts: 7
Joined: Sat Mar 21, 2020 4:10 pm

Re: Use 3DConnexion over Remote Desktop

Post by ETipler » Sat Mar 21, 2020 4:40 pm

I'm having this exact problem in the same situation with an older SpaceNavigator USB, P/N 3DX-600028. I've tried changing the settings on the laptop with no improvement.

angiel
Posts: 3
Joined: Tue Mar 24, 2020 10:00 am

Re: Use 3DConnexion over Remote Desktop

Post by angiel » Tue Mar 24, 2020 10:05 am

Using NX remotely. Having the same issue. Trying to work from home in these difficult times. Please advise a solution.

Sebastian_art
Posts: 5
Joined: Wed Mar 25, 2020 8:05 am

Re: Use 3DConnexion over Remote Desktop

Post by Sebastian_art » Wed Mar 25, 2020 10:52 am

Hi guys,

This is a common problem, but it is being solved. For remote access to my 3D mouse, I use Flexihub software. Since the mouse is usb connected, there will be no problems with sharing the device.

It's a two part server/workstation software enabling for remote USB and found it here:
https://www.flexihub.com/usb-in-remote-desktop.html
I am sure your Space Navigator in RDP session will work.
Good luck.

ETipler
Posts: 7
Joined: Sat Mar 21, 2020 4:10 pm

Re: Use 3DConnexion over Remote Desktop

Post by ETipler » Wed Mar 25, 2020 11:59 am

Thanks, Ill give it a shot. My 6 port mini-hub connected "normal" mouse and keyboard have no trouble, will they be affected?

Sebastian_art
Posts: 5
Joined: Wed Mar 25, 2020 8:05 am

Re: Use 3DConnexion over Remote Desktop

Post by Sebastian_art » Thu Mar 26, 2020 1:50 am

ETipler wrote:
Wed Mar 25, 2020 11:59 am
Thanks, Ill give it a shot. My 6 port mini-hub connected "normal" mouse and keyboard have no trouble, will they be affected?
What do you mean by affected? The regular mouse and keyboard connected to a USB hub should be redirected and stay fully functional as well

ETipler
Posts: 7
Joined: Sat Mar 21, 2020 4:10 pm

Re: Use 3DConnexion over Remote Desktop

Post by ETipler » Thu Mar 26, 2020 6:33 am

The SpaceNavigator, keyboard and standard mouse are all connected to the mini-hub. I can't risk affecting the functionality of the keyboard and standard mouse to gain functionality of the SpaceNavigator.

I haven't taken the time to test solution yet, maybe this afternoon.

Thanks again.

Chasedmo
Posts: 2
Joined: Tue Mar 31, 2020 7:26 am

Re: Use 3DConnexion over Remote Desktop

Post by Chasedmo » Tue Mar 31, 2020 7:29 am

Following up to see if FLexihub software works for you. I am trying to find a solution for our team. Please let me know. Thanks

ETipler
Posts: 7
Joined: Sat Mar 21, 2020 4:10 pm

Re: Use 3DConnexion over Remote Desktop

Post by ETipler » Tue Mar 31, 2020 8:17 am

I didn't install it, 7 days free and then annual fee stopped me.

dlouiselle
Posts: 1
Joined: Thu Apr 02, 2020 6:48 am

Re: Use 3DConnexion over Remote Desktop

Post by dlouiselle » Thu Apr 02, 2020 6:52 am

Has anyone found a solution? - Does Flexi hub or anything else work?

Taller_Birs
Posts: 1
Joined: Thu Apr 09, 2020 11:02 pm

Re: Use 3DConnexion over Remote Desktop

Post by Taller_Birs » Thu Apr 09, 2020 11:12 pm

dlouiselle wrote:
Thu Apr 02, 2020 6:52 am
Has anyone found a solution? - Does Flexi hub or anything else work?
Hi,

For remote access to my 3D mouse, I use Flexihub software. Since the mouse is usb connected, there will be no problems with sharing the device.

It's a two part server/workstation software enabling for remote USB.

I use 3d mouse in Teamviewer.
Good luck.

Post Reply