Space Explorer USB not working

Questions and answers about 3Dconnexion devices on macOS.

Moderator: Moderators

Post Reply
Bastardo
Posts: 5
Joined: Wed May 09, 2012 12:44 pm
Location: Polska

Space Explorer USB not working

Post by Bastardo »

Dear All,
please help. I have 10.10 Mac OS X installed, and I have had installed 10.2.1 Mac drivers for SpacePilot USB. Since then Space Pilot is not working.
The system can se the hardware so is preference panel of 3DConnexion, but the device stopped.
When I plug and unplug the device the LED is flashing once. WHen I restart system the device has LED turned on, when the drivers are loading after logging the LEDS go off.
Can not use it in any app.

This behauviour does not change whenever the SP is connected directly to my MB pro. or via LCD or via USB hub (powered).

Please help.

B.
Drivers Pane:
Zrzut ekranu 2014-11-17 o 15.53.45.png
Zrzut ekranu 2014-11-17 o 15.53.45.png (76.95 KiB) Viewed 9100 times
System USB devices:
Zrzut ekranu 2014-11-17 o 15.52.40.png
Zrzut ekranu 2014-11-17 o 15.52.40.png (189.63 KiB) Viewed 9100 times
maff2k
Posts: 3
Joined: Sun Apr 07, 2013 11:14 am

Re: Space Explorer USB not working

Post by maff2k »

I've just upgraded to the latest driver and my SpaceNavigator has stopped working. I see it in the USB list of the system:

SpaceNavigator:

Product ID: 0xc626
Vendor ID: 0x046d (Logitech Inc.)
Version: 4.04
Speed: Up to 1.5 Mb/sec
Manufacturer: 3Dconnexion
Location ID: 0xfa130000 / 5
Current Available (mA): 500
Current Required (mA): 100

But in the new driver I don't see anything:

No Device Found

:(
maff2k
Posts: 3
Joined: Sun Apr 07, 2013 11:14 am

Re: Space Explorer USB not working

Post by maff2k »

Sorted.

Completely removed the driver, this seemed to leave traces of the old driver so I did an uninstall again. Restart, install, all good!

Hope this solves your trouble too!
Post Reply