Dear All,
please help. I have 10.10 Mac OS X installed, and I have had installed 10.2.1 Mac drivers for SpacePilot USB. Since then Space Pilot is not working.
The system can se the hardware so is preference panel of 3DConnexion, but the device stopped.
When I plug and unplug the device the LED is flashing once. WHen I restart system the device has LED turned on, when the drivers are loading after logging the LEDS go off.
Can not use it in any app.
This behauviour does not change whenever the SP is connected directly to my MB pro. or via LCD or via USB hub (powered).
Please help.
B.
Drivers Pane:
System USB devices:
Space Explorer USB not working
Moderator: Moderators
Re: Space Explorer USB not working
I've just upgraded to the latest driver and my SpaceNavigator has stopped working. I see it in the USB list of the system:
SpaceNavigator:
Product ID: 0xc626
Vendor ID: 0x046d (Logitech Inc.)
Version: 4.04
Speed: Up to 1.5 Mb/sec
Manufacturer: 3Dconnexion
Location ID: 0xfa130000 / 5
Current Available (mA): 500
Current Required (mA): 100
But in the new driver I don't see anything:
No Device Found
SpaceNavigator:
Product ID: 0xc626
Vendor ID: 0x046d (Logitech Inc.)
Version: 4.04
Speed: Up to 1.5 Mb/sec
Manufacturer: 3Dconnexion
Location ID: 0xfa130000 / 5
Current Available (mA): 500
Current Required (mA): 100
But in the new driver I don't see anything:
No Device Found
Re: Space Explorer USB not working
Sorted.
Completely removed the driver, this seemed to leave traces of the old driver so I did an uninstall again. Restart, install, all good!
Hope this solves your trouble too!
Completely removed the driver, this seemed to leave traces of the old driver so I did an uninstall again. Restart, install, all good!
Hope this solves your trouble too!