3Dconnexion Forum

Hi CWC,

please refer to the following post: viewtopic.php?p=393#393

Hi blenderman,

the 3D navigation tools are designed to work in parallel with a mouse.

The driver identifies automatically the running applications, generally the plug-ins are intended for the button-mappings only.

Hi umblas, please remove the driver you installed and install it again as an administrator. I don't exactly unterstand what could happened, but removing and re-installing the driver makes sure, that nothing could go wrong. Please try to use your application after this re-installation. Afterward plea...

Hi BLAIRS

the versions v3-0-7 and v3-0-9 of our 3DxSoftware doesn't support MS-Office. You can download and install the 3DxOffice Plug-In from our Driver Download page:

http://www.3dconnexion.com/support/4a1.php

selecting "Archive (Legacy Software)" and the 3DxOffice Plug-In.

Hi Generic,

I have reproduced this issue in-house. I have opened an internal bug (#4274) to help track this issue. I hope it will be solved soon.

Hi Lewin, When you enter the Sketch mode in CATIA, the application automatically disables rotations since this what most users want (the Sketcher is mode to draw in 2D). If the user wants to re-enable rotations, it is a simple matter of assigning the "Rotation On/Off" command to a button a...

Hi Generic,

please try to reinstall the driver just activating the "Update Assistant" under "Extras".

Hi gforrest, please read the post of jwick, it could solve your problem: http://www.3dconnexion.com/forum/viewtopic.php?p=595#595 If this wouldn't help you, please contact the support from Cimatron, because they implemented the support for our devices in the application. In our new driver, which are...

Hi Joko, did you installed 3D Studio Max at first? The version number named by Keith is shown by the driver when you click on "Help -> About...". The driver will display also the firmware version. This version number is ther driver (3DxWare) version number. The version number included in t...

Hi gforrest,

please specify what version of the 3DxSoftware do you use.
What operating system do you have installed, whith which SP?
Has your device a serial or a USB connector?

Hi 3d-bologna, setting the rotation point in Solid Edge is an internal problem from Solid Edge. You have see: setting the rotation point works correctly in the demo you tried. Please read the section 4.1 of the included documentation (under Start -> Programs -> 3Dconnexion -> 3Dconnexion Add-In for ...

Hi drkangel1974 How did you installed the driver for the Space Navigator. You should had administrator privileges on the installation. For Sketchup you should have the same rights. You mentioned a program crash. Please specify which program crahses: Sketchup or the driver. The graphics version shoul...

Hi ems,

I would suggest you to try your device with the Demos. The cube demo would be suitable for a test.

If the navigation works properly, you should check your settings, perhaps you have the rotation disabled.

Hi 3d-bologna, Problem 1: When I modify a part under an assembly, I set rotation point but real rotation point don't change and it's not the one I set. Rotation work around another point. Sometimes works well but rotation point I've set is lost when I return to the assembly Problem 2: In Draft mode ...

Hi drkangel1974

Could you specify what version of Windows (including Service Pack Number) are you using?

And what version of Sketchup?

Did you create any object(-s) before the crash?

Could you test on another system navigating in Sketchup?