3Dconnexion Forum

I want to remove the rubber covered hand rest and buttons from the device body. This way I could clean the sticky rubber off the surface without damaging the rest of the device. Is it necessary to remove the screws under the label and rubber bits on the bottom? How to remove the controller cap? Than...

I figured it out. The problem is caused by the navigator rotating the object around a dynamically changing rotation pivot. This causes the object to move without being translated. The result is an offset probably in the transform matrix (but I don't know much about that). Anyway the solution is to u...

Hello, I have a problem with 3dconnexion driver breaking the transform of cameras in Maya 2014. I'm using driver version 10.0.19. When I try to make an animation or synchronize positions of two cameras, when one of them was moved with the Space Pilot things go very bad. With animation camera keys ge...

Yes, with xhost - you close the access to your display again. As far as I know you could even do it in the same terminal where you started the driver. Just in case you want to do this in a script. (Then you should start the driver in the background.) Great! I will use that untill it get's fixed. Th...

Can I do this:

xhost +
start the driver
and then run xhost - in another terminal

will that return things to normal secure operation?

I moved my .Xauthority file from the /home/<my> directory and it doesn't make a difference the driver still doesnt start.

Yes I am connected to a network and I tried using the network interface IP but it still doesn't work

Nope it doesn't work with the computer name or with the computer ip (127.0.0.1): susu@linux-7og5:~> xhost + linux-7og5 linux-7og5 being added to access control list susu@linux-7og5:~> su - Password: linux-7og5:~ # /etc/3DxWare/daemon/3dxsrv -d usb -debug [2009-10-22 11:05:09] uddev.c, 1198: UdDevIni...

The driver starts when I launch: xhost + su - /etc/3DxWare/daemon/3dxsrv -d usb -debug linux-7og5:~ # /etc/3DxWare/daemon/3dxsrv -d usb -debug [2009-10-21 23:27:27] uddev.c, 1198: UdDevInit() 0x56b010 [2009-10-21 23:27:27] 3dxsrv.c,797: displayname = :0.0 [2009-10-21 23:27:27] auth.c :: authGetUser(...

Hi eyeJ, does the driver start when you do first a xhost + localhost on the command line? Please add to the line in the /etc/inittab the options -E -debug. This will create a logfile when the driver starts. Maybe we find some hints in there. It will be /tmp/3DxWare.log. 3d:2345:respawn:/etc/3DxWare...

xhost + localhost: susu@linux-7og5:~> xhost + localhost localhost being added to access control list susu@linux-7og5:~> sudo /etc/3DxWare/daemon/3dxsrv -d usb root's password: No protocol specified [2009-10-20 19:45:29] Error: No connection to Xserver :0 - aborting. log: 3DxWareUNIX V1.4.3 ID 4872 l...

Hello I have a problem in suse 11.1 with the driver (version 1.4.3) when I try this: sudo /etc/3DxWare/daemon/3dxsrv -d usb I get this message: No protocol specified [2009-10-20 15:05:37] Error: No connection to Xserver :0 - aborting. when I login as root into the gnome desktop the driver runs fine....

I think I fixed the problem but I'll have to test it some more to be absolutely sure. Seems that the last time I cleaned my keyboard I misaligned something inside and because of that keyboard was causing the trouble. Now pressing the enter key on the letter part of the keyboard while changing values...

I get standard two lines also the problem doesn't happen when I switch desktops with xvalue. I guess it must be a problem with maya plugin then or something related to xinput in ubuntu. I've set the SpacePilot not to be used as xinput device recently because I tried it with the open source driver fo...

No I have:

Section "Extensions"
Option "Composite" "Disable"
EndSection

in xorg.conf so there is no extra 3d desktop effects enabled