3Dconnexion Forum

by **lally** » Sat Jun 28, 2008 1:02 pm

Hey all, just trying to get my new SpaceNav PE working on Opensolaris (2008.05, the new one with the sweet packaging system).

I get this:

Code: Select all: Installing files for 3DxWare for Unix / solaris...... Uninstalling a running driver. Please wait ... Done. Driver (usba10_ugen) not installed. Cannot find module (usba10_ugen). cp: 3dxware-solaris-v1-3-0-x86.tar.gz and /tmp/3dxware-solaris-v1-3-0-x86.tar.gz are identical Done.

Looks like usba10_ugen isn't used anymore. Here's all I found in /kernel/drv:

Code: Select all: [lally@sol tmp]$ ls /kernel/drv/*usb* /kernel/drv/scsa2usb* /kernel/drv/usb_ac* /kernel/drv/usb_as* /kernel/drv/usb_mid* /kernel/drv/usbsacm* /kernel/drv/usbsksp* /kernel/drv/usbvc* /kernel/drv/scsa2usb.conf /kernel/drv/usb_ac.conf /kernel/drv/usb_ia* /kernel/drv/usbprn* /kernel/drv/usbser_edge* /kernel/drv/usbsprl*

Is there going to be an update to the driver? Is there a beta? Is there a way to get the current driver to work?

Thanks!

-ls

by **UtaSH** » Tue Jul 01, 2008 7:32 am

Hi lally,

unfortunately we did not test Opensolaris for now.
Can you please post here the output of the command

uname -rfrom your Opensolaris?

Uta Ludwig
3Dconnexion

by **lally** » Fri Jul 04, 2008 10:39 pm

Code: Select all: Sun Microsystems Inc. SunOS 5.11 snv_91 January 2008 [lally@sol ~]$ uname -r 5.11 [lally@sol ~]$ uname -a SunOS sol 5.11 snv_91 i86pc i386 i86pc [lally@sol ~]$

by **UtaSH** » Tue Jul 15, 2008 9:21 am

Hi Lally,

sorry for the delay. There is a small bug in the installation script. I'll send you a fixed version of the installation package. Unfortunately I could not test the driver itself on our Opensolaris installation as I still have a problem with the XServer.

Thus it would be nice if you post your findings with the driver on Opensolaris here. Thx!

Uta Ludwig
3Dconnexion

by **lally** » Sun Aug 24, 2008 6:17 am

Hello,

Thank you for all the support you've given me (no pun intended). The device daemon now installs and run-time links properly (once I was able to find an old copy of the motif package), but it cannot seem to find the spacenavigator.

Perhaps there were changes in how solaris handles USB in this kernel (Solaris 11) ?

Here's what I tried, after the inittab-based startup failed:

Code: Select all: [lally@sol daemon]$ sudo ./3dxsrv -d usb Password: [2008-08-24 09:17:47] Error: Could not open USB port or no supported device found! Exiting!

But the device is clearly on the USB bus, identified by the kernel:

Code: Select all: [lally@sol net]$ cfgadm -v Ap_Id Receptacle Occupant Condition Information When Type Busy Phys_Id sata0/0::dsk/c5t0d0 connected configured ok Mod: HITACHI HDS7216SBSUN160G 0651QGX1GF FRev: P22OAB8A SN: PVB300Z2SGX1GF unavailable disk n /devices/pci@0,0/pci108e,6676@5:0 sata0/1::dsk/c5t1d0 connected configured ok Mod: HITACHI HDS7216SBSUN160G 0735Q7PAWF FRev: P22OAB8A SN: PVB301Z5U7PAWF unavailable disk n /devices/pci@0,0/pci108e,6676@5:1 sata1/0::dsk/c6t0d0 connected configured ok Mod: HITACHI HDS7216SBSUN160G 0735QZ3J2F FRev: P22OAB8A SN: PVB301Z5TZ3J2F unavailable disk n /devices/pci@0,0/pci108e,6676@5,1:0 sata1/1 empty unconfigured ok unavailable sata-port n /devices/pci@0,0/pci108e,6676@5,1:1 sata2/0 empty unconfigured ok unavailable sata-port n /devices/pci@79,0/pci108e,6676@5:0 sata2/1 empty unconfigured ok unavailable sata-port n /devices/pci@79,0/pci108e,6676@5:1 sata3/0 empty unconfigured ok unavailable sata-port n /devices/pci@79,0/pci108e,6676@5,1:0 sata3/1 empty unconfigured ok unavailable sata-port n /devices/pci@79,0/pci108e,6676@5,1:1 usb2/1 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:1 usb2/2 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:2 usb2/3 connected configured ok Mfg: PI Engineering Product: Kinesis Keyboard Hub NConfigs: 1 Config: 0 <no> unavailable usb-hub n /devices/pci@0,0/pci108e,6676@2:3 usb2/3.1 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2/hub@3:3.1 usb2/3.2 connected configured ok Mfg: <undef> Product: <undef> NConfigs: 1 Config: 0 <no> unavailable usb-device n /devices/pci@0,0/pci108e,6676@2/hub@3:3.2 usb2/3.3 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2/hub@3:3.3 usb2/3.4 connected configured ok Mfg: 3Dconnexion Product: SpaceNavigator NConfigs: 1 Config: 0 <no> unavailable usb-input n /devices/pci@0,0/pci108e,6676@2/hub@3:3.4 usb2/4 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:4 usb2/5 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:5 usb2/6 connected configured ok Mfg: Logitech Product: USB Receiver NConfigs: 1 Config: 0 <no> unavailable usb-mouse n /devices/pci@0,0/pci108e,6676@2:6 usb2/7 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:7 usb2/8 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:8 usb2/9 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:9 usb2/10 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:10 usb3/1 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:1 usb3/2 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:2 usb3/3 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:3 usb3/4 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:4 usb3/5 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:5 usb3/6 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:6 usb3/7 connected configured ok Mfg: <undef> Product: <undef> NConfigs: 1 Config: 0 <no> unavailable usb-hub n /devices/pci@0,0/pci108e,6676@2,1:7 usb3/7.1 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1/hub@7:7.1 usb3/7.2 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1/hub@7:7.2 usb3/7.3 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1/hub@7:7.3 usb3/7.4 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1/hub@7:7.4 usb3/8 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:8 usb3/9 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:9 usb3/10 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:10

It looks like some updates may have to be made to support Solaris 11. A change to libusb and perhaps the installer could go to SMF? inittab's a little out of style these days.

Of course, that part doesn't matter to me -- a working spacenav would be great!

Thanks,

-Lally

by **crobl** » Tue Sep 02, 2008 8:44 am

Hi lally,

please let me jump in this discussion.
You're right. The kernel recognises your SpaceNavigator ("configured ok").
Can you please do a "ls -al /dev/usb" and post it.

If you have a subdirectory "46d.c626" can you please do the following things:
- also post a listing of this directory
- start the driver as root (via "su -"), not via "sudo" (is there a difference?)

Also, can you please run the driver with the additional option "-debug"; what is the output?

Regards,

Christian Robl
3Dconnexion

by **lally** » Mon Sep 08, 2008 12:53 pm

I've moved the device between my mac & solaris box for a bit now, so I'll include the cfgadm output again, in case some relevant changes have occurred b/c of that.

Here's what you asked for:

Code: Select all: [lally@sol ~]$ ls -al /dev/usb total 21 drwxr-xr-x 17 root root 17 2008-09-08 15:49 ./ drwxr-xr-x 251 root sys 251 2008-07-27 01:55 ../ drwxr-xr-x 3 root root 3 2008-06-30 21:13 5f3.7/ lrwxrwxrwx 1 root root 68 2008-05-08 16:50 device0 -> ../../devices/pci@0,0/pci1022,7460@6/pci1022,7464@0/device@3:usb_mid lrwxrwxrwx 1 root root 59 2008-06-30 01:26 device1 -> ../../devices/pci@0,0/pci108e,6676@2/hub@5/device@2:usb_mid lrwxrwxrwx 1 root root 59 2008-06-30 21:13 device2 -> ../../devices/pci@0,0/pci108e,6676@2/hub@3/device@2:usb_mid lrwxrwxrwx 1 root root 50 2008-06-14 15:39 hid0 -> ../../devices/pci@0,0/pci108e,6676@2/mouse@6:mouse lrwxrwxrwx 1 root root 71 2008-06-30 21:13 hid1 -> ../../devices/pci@0,0/pci108e,6676@2/hub@3/device@2/keyboard@0:keyboard lrwxrwxrwx 1 root root 69 2008-06-30 21:13 hid2 -> ../../devices/pci@0,0/pci108e,6676@2/hub@3/device@2/input@1:hid_1_128 lrwxrwxrwx 1 root root 58 2008-09-08 15:49 hid3 -> ../../devices/pci@0,0/pci108e,6676@2/hub@3/input@4:hid_1_8 lrwxrwxrwx 1 root root 56 2008-05-08 16:50 hub0 -> ../../devices/pci@0,0/pci1022,7460@6/pci1022,7464@0:hubd lrwxrwxrwx 1 root root 58 2008-05-08 16:50 hub1 -> ../../devices/pci@0,0/pci1022,7460@6/pci1022,7464@0,1:hubd lrwxrwxrwx 1 root root 64 2008-05-08 16:50 hub2 -> ../../devices/pci@0,0/pci1022,7460@6/pci1022,7464@0,1/hub@3:hubd lrwxrwxrwx 1 root root 41 2008-05-08 16:50 hub3 -> ../../devices/pci@0,0/pci108e,6676@2:hubd lrwxrwxrwx 1 root root 43 2008-05-08 16:50 hub4 -> ../../devices/pci@0,0/pci108e,6676@2,1:hubd lrwxrwxrwx 1 root root 47 2008-06-30 21:13 hub5 -> ../../devices/pci@0,0/pci108e,6676@2/hub@3:hubd lrwxrwxrwx 1 root root 49 2008-05-08 16:50 hub6 -> ../../devices/pci@0,0/pci108e,6676@2,1/hub@7:hubd

(more than you asked for, but some things may have changed a bit with the remove/insert of the device)

Code: Select all: [lally@sol ~]$ cfgadm -v Ap_Id Receptacle Occupant Condition Information When Type Busy Phys_Id sata0/0::dsk/c5t0d0 connected configured ok Mod: HITACHI HDS7216SBSUN160G 0651QGX1GF FRev: P22OAB8A SN: PVB300Z2SGX1GF unavailable disk n /devices/pci@0,0/pci108e,6676@5:0 sata0/1::dsk/c5t1d0 connected configured ok Mod: HITACHI HDS7216SBSUN160G 0735Q7PAWF FRev: P22OAB8A SN: PVB301Z5U7PAWF unavailable disk n /devices/pci@0,0/pci108e,6676@5:1 sata1/0::dsk/c6t0d0 connected configured ok Mod: HITACHI HDS7216SBSUN160G 0735QZ3J2F FRev: P22OAB8A SN: PVB301Z5TZ3J2F unavailable disk n /devices/pci@0,0/pci108e,6676@5,1:0 sata1/1 empty unconfigured ok unavailable sata-port n /devices/pci@0,0/pci108e,6676@5,1:1 sata2/0 empty unconfigured ok unavailable sata-port n /devices/pci@79,0/pci108e,6676@5:0 sata2/1 empty unconfigured ok unavailable sata-port n /devices/pci@79,0/pci108e,6676@5:1 sata3/0 empty unconfigured ok unavailable sata-port n /devices/pci@79,0/pci108e,6676@5,1:0 sata3/1 empty unconfigured ok unavailable sata-port n /devices/pci@79,0/pci108e,6676@5,1:1 usb2/1 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:1 usb2/2 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:2 usb2/3 connected configured ok Mfg: PI Engineering Product: Kinesis Keyboard Hub NConfigs: 1 Config: 0 <no> unavailable usb-hub n /devices/pci@0,0/pci108e,6676@2:3 usb2/3.1 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2/hub@3:3.1 usb2/3.2 connected configured ok Mfg: <undef> Product: <undef> NConfigs: 1 Config: 0 <no> unavailable usb-device n /devices/pci@0,0/pci108e,6676@2/hub@3:3.2 usb2/3.3 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2/hub@3:3.3 usb2/3.4 connected configured ok Mfg: 3Dconnexion Product: SpaceNavigator NConfigs: 1 Config: 0 <no> unavailable usb-input n /devices/pci@0,0/pci108e,6676@2/hub@3:3.4 usb2/4 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:4 usb2/5 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:5 usb2/6 connected configured ok Mfg: Logitech Product: USB Receiver NConfigs: 1 Config: 0 <no> unavailable usb-mouse n /devices/pci@0,0/pci108e,6676@2:6 usb2/7 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:7 usb2/8 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:8 usb2/9 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:9 usb2/10 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2:10 usb3/1 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:1 usb3/2 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:2 usb3/3 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:3 usb3/4 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:4 usb3/5 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:5 usb3/6 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:6 usb3/7 connected configured ok Mfg: <undef> Product: <undef> NConfigs: 1 Config: 0 <no> unavailable usb-hub n /devices/pci@0,0/pci108e,6676@2,1:7 usb3/7.1 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1/hub@7:7.1 usb3/7.2 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1/hub@7:7.2 usb3/7.3 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1/hub@7:7.3 usb3/7.4 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1/hub@7:7.4 usb3/8 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:8 usb3/9 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:9 usb3/10 empty unconfigured ok unavailable unknown n /devices/pci@0,0/pci108e,6676@2,1:10 [lally@sol ~]$ ls /devices/ agpgart/ fct/ iscsi/ pci@0,0/ pci@0,0:reg pci@79,0:intr pseudo:devctl scsi_vhci/ stmf:admin agpgart:agpgart fct:admin iscsi:devctl pci@0,0:devctl pci@79,0/ pci@79,0:reg sbd/ scsi_vhci:devctl xsvc@0,0/ cpus/ isa/ options/ pci@0,0:intr pci@79,0:devctl pseudo/ sbd:admin stmf/ xsvc@0,0:xsvc [lally@sol ~]$ ls /dev 1394/ dsk/ ip@ ksyms@ nge1@ poolctl@ ptypc@ ptyqe@ ramdiskctl@ spdsock@ ticotsord@ ttypb@ ttyqd@ ttyrf@ agp/ dtrace/ ip6@ llc1@ nsctl@ power_button@ ptypd@ ptyqf@ random@ sppp@ tnfctl@ ttypc@ ttyqe@ ucode@ agpgart@ dump@ ipauth@ llc2@ nsmb@ ppm@ ptype@ ptyr0@ rawip@ sppptun@ tnfmap@ ttypd@ ttyqf@ udp@ allkmem@ e1000g@ ipf@ lockstat@ null@ ptmajor@ ptypf@ ptyr1@ rawip6@ srn@ tty@ ttype@ ttyr0@ udp6@ arp@ e1000g0@ ipl@ lofi/ nvidia0@ ptmx@ ptyq0@ ptyr2@ rdc@ stderr@ tty00@ ttypf@ ttyr1@ urandom@ audio@ e1000g1@ iplookup@ lofictl@ nvidia1@ pts/ ptyq1@ ptyr3@ rds@ stdin@ ttya@ ttyq0@ ttyr2@ usb/ audioctl@ e1000g2@ ipnat@ log@ nvidia2@ ptyp0@ ptyq2@ ptyr4@ rdsk/ stdout@ ttyd0@ ttyq1@ ttyr3@ vboxdrv@ bl@ e1000g3@ ipscan@ logindmux@ nvidia3@ ptyp1@ ptyq3@ ptyr5@ removable-media/ sv@ ttyp0@ ttyq2@ ttyr4@ vni@ bmc@ fb@ ipsecah@ mc/ nvidia4@ ptyp2@ ptyq4@ ptyr6@ rlofi/ swap/ ttyp1@ ttyq3@ ttyr5@ vt00@ brand/ fb0@ ipsecesp@ md/ nvidia5@ ptyp3@ ptyq5@ ptyr7@ rmt/ syscon@ ttyp2@ ttyq4@ ttyr6@ winlock@ cfg/ fb1@ ipstate@ mem@ nvidia6@ ptyp4@ ptyq6@ ptyr8@ rts@ sysevent@ ttyp3@ ttyq5@ ttyr7@ wscons@ conslog@ fbs/ ipsync@ mouse@ nvidia7@ ptyp5@ ptyq7@ ptyr9@ sad/ sysmsg@ ttyp4@ ttyq6@ ttyr8@ xsvc@ console@ fd/ kbd@ msglog@ nvidiactl@ ptyp6@ ptyq8@ ptyra@ sctp@ systty@ ttyp5@ ttyq7@ ttyr9@ zcons/ cpu/ fssnapctl@ keysock@ nca@ openprom@ ptyp7@ ptyq9@ ptyrb@ sctp6@ tcp@ ttyp6@ ttyq8@ ttyra@ zero@ crypto@ hotpluggable/ kmdb@ ncall@ physmem@ ptyp8@ ptyqa@ ptyrc@ sdbc@ tcp6@ ttyp7@ ttyq9@ ttyrb@ zfs@ cryptoadm@ icmp@ kmem@ net/ pm@ ptyp9@ ptyqb@ ptyrd@ sdp@ term/ ttyp8@ ttyqa@ ttyrc@ cua/ icmp6@ kssl@ nge@ poll@ ptypa@ ptyqc@ ptyre@ smbios@ ticlts@ ttyp9@ ttyqb@ ttyrd@ cua0@ ii@ kstat@ nge0@ pool@ ptypb@ ptyqd@ ptyrf@ sound/ ticots@ ttypa@ ttyqc@ ttyre@ [lally@sol ~]$ ls /dev/usb/ 5f3.7/ device0@ device1@ device2@ hid0@ hid1@ hid2@ hid3@ hub0@ hub1@ hub2@ hub3@ hub4@ hub5@ hub6@ [lally@sol ~]$ ls -l /dev/usb/5f3.7/ total 2 drwxr-xr-x 9 root root 9 2008-06-30 21:13 0/ [lally@sol ~]$ ls -l /dev/usb/5f3.7/0/ total 7 lrwxrwxrwx 1 root root 70 2008-06-30 21:13 cntrl0 -> ../../../../devices/pci@0,0/pci108e,6676@2/hub@3/device@2:5f3.7.cntrl0 lrwxrwxrwx 1 root root 74 2008-06-30 21:13 cntrl0stat -> ../../../../devices/pci@0,0/pci108e,6676@2/hub@3/device@2:5f3.7.cntrl0stat lrwxrwxrwx 1 root root 71 2008-06-30 21:13 devstat -> ../../../../devices/pci@0,0/pci108e,6676@2/hub@3/device@2:5f3.7.devstat lrwxrwxrwx 1 root root 70 2008-06-30 21:13 if0in1 -> ../../../../devices/pci@0,0/pci108e,6676@2/hub@3/device@2:5f3.7.if0in1 lrwxrwxrwx 1 root root 74 2008-06-30 21:13 if0in1stat -> ../../../../devices/pci@0,0/pci108e,6676@2/hub@3/device@2:5f3.7.if0in1stat lrwxrwxrwx 1 root root 70 2008-06-30 21:13 if1in2 -> ../../../../devices/pci@0,0/pci108e,6676@2/hub@3/device@2:5f3.7.if1in2 lrwxrwxrwx 1 root root 74 2008-06-30 21:13 if1in2stat -> ../../../../devices/pci@0,0/pci108e,6676@2/hub@3/device@2:5f3.7.if1in2stat

And finally, after a "su -"

Code: Select all: -bash-3.2# ./3dxsrv -debug -d usb [2008-09-08 15:52:13] uddev.c, 1171: UdDevInit() 80c53f8 [2008-09-08 15:52:13] 3dxsrv.c,705: displayname = $DISPLAY set to :0 [2008-09-08 15:52:13] 3dxsrv.c,710: putenv() was successful [2008-09-08 15:52:13] 3dxsrv.c,712: displayname is now :0 [2008-09-08 15:52:13] auth.c :: authGetUser(), FOUND: user = lally, id = :0, line = console, pid = 11361, host = :0, type = 7 [2008-09-08 15:52:13] auth.c :: authGetUser(), FOUND: user home = "/export/home/lally" [2008-09-08 15:52:13] 3dxsrv.c :: startupCommandLine(), authGetUser(), user=lally [2008-09-08 15:52:13] Error: Could not open USB port or no supported device found! Exiting! -bash-3.2#

Thanks for your help!

by **crobl** » Fri Sep 12, 2008 7:58 am

Hi lally,

apologies for being late with my answer!

This is a bit strange...
Pleas look at the file "/etc//driver_aliases". Are there lines at the end of the file like:

Code: Select all: ugen "usb46d,c603" ugen "usb46d,c621" ugen "usb46d,c623" ugen "usb46d,c625" ugen "usb46d,c627" ugen "usb46d,c628"

Were there errors at installation time?

Have you had a look at the USB FAQ from Sun (http://www.sun.com/io_technologies/usb/USB-Faq.html)? Have you ran the script mentioned under entry 5?

Regards,
Christian

by **lally** » Fri Sep 12, 2008 9:56 am

If you mean http://www.sun.com/bigadmin/scripts/sun ... config.txt
then yes, I ran it, but it told me "This x86 system does not have a USB Dual Framework environment"

/etc/driver_aliases has exactly those lines you showed at the end.

I reran the installer today to make sure:

Code: Select all: [root@sol tmp]# ./install-3dxunix.sh This installs 3DxWareUnix V1.3.0 on this machine. Continue? (y/n) [y] y Choose one of the following platforms: 1. HP-UX 2. Solaris 3. AIX 5 4. Linux 5. Exit Please enter your choice (1-5)[2]: 2 Installing files for 3DxWare for Unix / solaris...... Uninstalling a running driver. Please wait ... Done. Driver (usba10_ugen) not installed. ("usb46d,c603") already in use as a driver or alias. cp: 3dxware-solaris-v1-3-0-x86.tar.gz and /tmp/3dxware-solaris-v1-3-0-x86.tar.gz are identical Done. Do you want 3DxWareUnix being started with every login (from the /etc/inittab)? (y/n) [y] n Please start the driver manually. [/etc/3DxWare/daemon/3dxsrv -d <port>] **************************************************************** For testing purposes you can find the demos xcube and xvalues at /tmp ****************************************************************

Also, I noticed these on my dmesg when unplugging/replugging in the spacenav in one of the front usb2 ports on my ultra 40 m2:

Code: Select all: Sep 12 12:44:48 sol genunix: [ID 408114 kern.info] /pci@0,0/pci108e,6676@2/input@4 (hid16) online Sep 12 12:48:49 sol genunix: [ID 408114 kern.info] /pci@0,0/pci108e,6676@2/input@4 (hid16) offline Sep 12 12:48:55 sol usba: [ID 912658 kern.info] USB 2.0 device (usb46d,c626) operating at low speed (USB 1.x) on USB 2.0 external hub: input@2, hid14 at bus address 3 Sep 12 12:48:55 sol usba: [ID 349649 kern.info] 3Dconnexion SpaceNavigator Sep 12 12:48:55 sol genunix: [ID 936769 kern.info] hid14 is /pci@0,0/pci108e,6676@2,1/hub@7/input@2 Sep 12 12:48:55 sol genunix: [ID 408114 kern.info] /pci@0,0/pci108e,6676@2,1/hub@7/input@2 (hid14) online Sep 12 12:49:56 sol genunix: [ID 408114 kern.info] /pci@0,0/pci108e,6676@2,1/hub@7/input@2 (hid14) offline Sep 12 12:49:59 sol usba: [ID 912658 kern.info] USB 2.0 device (usb46d,c626) operating at low speed (USB 1.x) on USB 2.0 external hub: input@2, hid14 at bus address 3 Sep 12 12:49:59 sol usba: [ID 349649 kern.info] 3Dconnexion SpaceNavigator Sep 12 12:49:59 sol genunix: [ID 936769 kern.info] hid14 is /pci@0,0/pci108e,6676@2,1/hub@7/input@2 Sep 12 12:49:59 sol genunix: [ID 408114 kern.info] /pci@0,0/pci108e,6676@2,1/hub@7/input@2 (hid14) online Sep 12 12:55:06 sol genunix: [ID 408114 kern.info] /pci@0,0/pci108e,6676@2,1/hub@7/input@2 (hid14) offline

by **AvonPok** » Sat Jul 04, 2009 3:14 pm

Is there actually something to get the driver in a working state for opensolaris?

It's almost a year since the last post!

greets,
AvonPok

by **UtaSH** » Mon Jul 06, 2009 3:18 am

Hello AvonPok,

no, sorry. No news on this.

We did not yet include OpenSolaris to our supported platforms. We support Sparc Solaris (8 and higher) and Solaris x86 (Version 10 and higher).

Uta Ludwig
3Dconnexion

by **rhtoc** » Sat Jan 09, 2010 4:38 pm

Hi Guys

Since this is a usb problem is it likely that a serial 3d mouse will work in OpenSolaris?

3Dconnexion Forum

Opensolaris support?

Opensolaris support?

Re: Opensolaris support?

Updated status

Who is online